410 Stainless Steel Seamless Pipes Grades
Type 304 | Type 304L | Type 304H | Type 316 | Type 316L | Type 316H | Type 317L | Type 321 | Type 347 | Type 410 | Type 904L | UNS 32750 Duplex
410 Stainless Steel Seamless Pipes
ASTM A312 TP 410 Stainless Steel Pipes | 410 IBR Certified Stainless Steel Seamless Pipes and Tubes
410 stainless steel is a hardenable martensitic stainless steel alloy. Unlike austenitic grades it can be heat treated ("quench and temper") to generate high strength with good ductility. 410 alloy is required when strength, hardness and wear resistance is required with some corrosion resistance.
Size : 1/8"NB TO 42"NB IN
Schedule: SCH 10, SCH20, SCH30, SCH40, STD, SCH60, XS, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form : Round, Square, Rectangular, Hydraulic Etc.
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded.
Nickel Alloy Pipe Standard:
• UNS 10276 (HASTELLOY C 276 Pipe)
|
• UNS 2200 (NICKEL 200 Pipe) |
• UNS 2201 (NICKEL 201 Pipe ) |
• UNS 4400 (MONEL 400 Pipe) |
• UNS 8020 (ALLOY 20 Pipe) |
• UNS 8825 INCONEL (825 Pipe) |
• UNS 6600 (INCONEL 600 Pipe ) |
• UNS 6601 (INCONEL 601 Pipe) |
• UNS 6625 (INCONEL 625 Pipe) |
Product Range
Specifications: ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790
Sizes (Seamless): 1/2" NB - 24" NB
Sizes (ERW): 1/2" NB - 24" NB
Sizes (EFW): 6" NB - 100" NB
Wall Thickness available:
Schedule 5S - Schedule XXS (heavier on request)
Other Materials Testing:
NACE MR0175, H2 SERVICE, OXYGEN SERVICE, CRYO SERVICE, etc.
Dimensions:
All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.
Background of 410 Stainless Steel Pipes and Tubes
Grade 410 is the basic martensitic stainless steel; like most non-stainless steels it can be hardened by a "quench-and-temper" heat treatment. It contains a minimum of 11.5 per cent chromium, just sufficient to give corrosion resistance properties. It achieves maximum corrosion resistance when it has been hardened and tempered and then polished. Grade 410 is a general purpose grade often supplied in the hardened, but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required.
Martensitic stainless steels are optimised for high hardness, and other properties are to some degree compromised. Fabrication must be by methods that allow for poor weldability and usually the need for a final heat treatment. Corrosion resistance of the martensitic grades is lower than that of the common austenitic grades, and their useful operating temperature range is limited by their loss of ductility at sub-zero temperatures and loss of strength by over-tempering at elevated temperatures.
Composition of 410 Stainless Steel Pipes and Tubes
Typical compositional ranges for grade 410 stainless steels are given in table 1.
Table 1. Composition ranges for 410 grade stainless steel
| Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
| 410 |
min.
max. |
-
0.15 |
-
1.00 |
-
1.00 |
-
0.040 |
-
0.030 |
11.5
13.5 |
- |
0.75 |
- |
Mechanical Properties of 410 Stainless Steel Pipes and Tubes
Typical mechanical properties for grade 410 stainless steels are given in table 2.
Table 2. Mechanical properties of 410 grade stainless steel
| Tempering Temperature (0C) |
Tensile Strength (MPa) |
Yield Strength 0.2% Proof (MPa) |
Elongation (% in 50mm) |
Hardness Brinell (HB) |
Impact Charpy V (J) |
| Annealed * |
480 min |
275 min |
16 min |
- |
- |
| 204 |
1310 |
1000 |
16 |
388 |
30 |
| 316 |
1240 |
960 |
14 |
325 |
36 |
| 427 |
1405 |
950 |
16 |
401 |
# |
| 538 |
985 |
730 |
16 |
321 |
# |
| 593 |
870 |
675 |
20 |
255 |
39 |
| 650 |
755 |
575 |
23 |
225 |
80 |
* Annealed properties are specified for Condition A of ASTM A276, for cold finished bar.
# Due to associated low impact resistance this steel should not be tempered in the range 425-6000C |
Physical Properties of 410 Stainless Steel Pipes and Tubes
Typical physical properties for annealed grade 410 stainless steels are given in table 3.
Table 3. Physical properties of 410 grade stainless steel in the annealed condition
| Grade |
Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Coefficient of Thermal Expansion
(m/m/0C) |
Thermal Conductivity
(W/m.K) |
Specific Heat 0-1000C
(J/kg.K) |
Electrical Resistivity (n.m) |
| 0-1000C |
0-3150C |
0-5380C |
at 1000C |
at 5000C |
| 410 |
7750 |
200 |
9.9 |
11.4 |
11.6 |
24.9 |
28.7 |
460 |
570 |
Grade Specification Comparison of 410 Stainless Steel Pipes and Tubes
Approximate grade comparisons for 410 stainless steels are given in table 4.
Table 4. Grade specifications for 410 grade stainless steel
| Grade |
UNS No |
Old British |
Euronorm |
Swedish SS |
Japanese JIS |
| BS |
En |
No |
Name |
| 410 |
S41000 |
410S21 |
56A |
1.4006 |
X12Cr13 |
2302 |
SUS 410 |
| These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted. |
Corrosion Resistance of 410 Stainless Steel Pipes and Tubes
410 resists dry atmosphere, fresh water, mild alkalies and acids, food, steam and hot gases. Must be hardened for maximum heat and corrosion resistance. Performance is best with a smooth surface finish. Less corrosion resistant than the austenitic grades and also less than 17% chromium ferritic alloys such as Grade 430.
Heat Treatment of 410 Stainless Steel Pipes and Tubes
Annealing
Full anneal - 815-9000C, slow furnace cool to 6000C and then air cool.
Process Anneal - 650-7600C and air cool.
Applications of 410 Stainless Steel Pipes and Tubes
Typical applications include:
Pump and valve parts and shafts
Steam and gas turbine parts
Petroleum fractionating towers
Minen ladder rungs
- INCONEL Seamless Pipes and Tubes 600 gr.
- INCONEL Seamless Pipes and Tubes 601 gr.
- INCONEL Seamless Pipes and Tubes 617 gr
- INCONEL Seamless Pipes and Tubes 625 gr
- INCONEL Seamless Pipes and Tubes 718 gr
- INCONEL Seamless Pipes and Tubes 800 gr
- INCONEL Seamless Pipes and Tubes 800H gr
- INCONEL Seamless Pipes and Tubes 800HT GR
- INCONEL Seamless Pipes and Tubes 825 gr
- HASTELLOY Seamless Pipes and Tubes GR. C-22
- HASTELLOY Seamless Pipes and Tubes GR. C-276
- HASTELLOY Seamless Pipes and Tubes GR. B-2
- HASTELLOY Seamless Pipes and Tubes GR. X
- NICKEL Seamless Pipes and Tubes 200 gr.
- NICKEL Seamless Pipes and Tubes 201 gr.
- MONEL Seamless Pipes and Tubes 400 gr.
- MONEL Seamless Pipes and Tubes 405 gr.
- MONEL Seamless Pipes and Tubes K500 gr
- Stainless steel Seamless Pipes and Tubes 304 gr.
- Stainless steel Seamless Pipes and Tubes 304l gr.
- Stainless steel Seamless Pipes and Tubes 304H gr.
- Stainless steel Seamless Pipes and Tubes 316 gr.
- Stainless steel Seamless Pipes and Tubes 316l gr.
- Stainless steel Seamless Pipes and Tubes 904L gr.
- Stainless steel Seamless Pipes and Tubes 310 gr.
- Stainless steel Seamless Pipes and Tubes 321 gr.
- Stainless steel Seamless Pipes and Tubes 347 gr.
- Stainless steel Seamless Pipes and Tubes 347h gr.
|
- ALLOY STEEL Seamless Pipes and Tubes ASTM A-335, GR P-5
- ALLOY STEEL Seamless Pipes and Tubes ASTM A-335, GR P-9
- ALLOY STEEL Seamless Pipes and Tubes ASTM A-335, GR P-11
- ALLOY STEEL Seamless Pipes and Tubes ASTM A-335, GR P-22
- ALLOY STEEL Seamless Pipes and Tubes ASTM A-335, GR P-91
- duplex steel 2507 gr. Seamless Pipes and Tubes
- CARBON STEEL Seamless Pipes and Tubes FITTINGS ASTM A-106, GR B
- CARBON STEEL Seamless Pipes and Tubes FITTINGS ASTM A-333, GR 6
- CARBON STEEL Seamless Pipes and Tubes FITTINGS ASTM A-53, GR B
- TITANIUM Seamless Pipes and Tubes IN GRADE OF 2
- TITANIUM Seamless Pipes and Tubes IN GRADE OF 5
- TiTANIUM Seamless Pipes and Tubes IN GRADE OF 7
- Duplex Steel S32760 gr. Seamless Pipes and Tubes
|
