ASTM B366 Socket weld Fittings manufacturer & exporter

→ Nickel Alloys

→ PRODUCTS





Worldmap | Suppliers of Stainless Steel Industrial & Construction Products Worldwide
We are industrial suppliers of Nickel Alloy 200 Products

Home / Products / Nickel Alloys / 254 SMO (UNS S31254)

Nickel Alloys254 SMO Pipes

Know more »

Nickel Alloys254 SMO Socket weld Fittings

Know more »

Nickel Alloys254 SMO Tubes

Know more »

Nickel Alloys254 SMO Sheets

Know more »

Nickel Alloys254 SMO Outlets

Know more »

Nickel Alloys254 SMO Flanges

Know more »

Nickel Alloys254 SMO Butt welding Fittings

Know more »

Nickel Alloys254 SMO Threaded Fittings

Know more »

Nickel Alloys254 SMO Plates

Know more »

Nickel Alloys254 SMO Fasteners

Know more »

Nickel Alloys254 SMO Bars

Know more »

Nickel Alloys254 SMO Wire

Know more »

Nickel Alloys254 SMO Rods

Know more »

Specifications

Alloy Common Name Related Specifications Tensile Strength Proof Stress Elongation
British European United States
Alloy 254 254SMO   1.4547 ASTM A479/A473,
/A240 S31254
F44		 655
[95]		 305
[44.2]		 35

Specifications of Alloy 254
  • Alloy 254 to MLA-MPS-254-BAR
  • ASTM A479 Bar UNS S31254
  • ASTM A276 Bar UNS S31254
  • ASTM A182 Forgings UNS S31254 F44
  • ASTM A240 Plate S31254

Chemical Specification of Alloy 254

Elements C Cr Fe Mo Mn N Ni Nb P S Si V
Minimum   19.5 REMAINDER 6.0   0.18 17.5          
Maximum 0.02 20.5   6.5 1.0 0.22 18.5   0.03 0.01 0.8  

Basic Properties of Alloy 254- Mechanical Properties

0.2% Proof Stress (N/mm2 )[ksi] minimum 300 [43.5]
Ultimate Tensile Strength (N/mm2) [ksi] minimum 650[94.2]
Elongation (%) minimum 35
Hardness (HBN) 270 max
Reduction of Area(%) minimum 50

Physical Properties of Alloy 254

Density (Kg.m-3) 8000
Magnetic Permeability <1.05
Young’s Modulus (N/mm2) 200 x 103
Specific Heat 20°C (J.Kg-1.°K-1) 500
Electrical resistance, 20°C (µ.O.m) 0.85
Thermal conductivity, 20°C (W.m-1.°K-1) 13.5

 

Machining Advice of Alloy 254 - Hot worked and precipitation hardened

Operation Cutting Speed m/min (ft/min) Feed Rate
mm/rev (in/rev)		 Depth of cut mm (in)
Milling 18 (58) 0.13-0.25 mm/tooth
0.005-0.010 in/tooth		 0.2-3.0 (0.007-0.12)
Drilling 6.4mm(1/4") dia 250rpm 0.075(0.003)  
Drilling 12.7mm(1/2") dia 250 rpm 0.125(0.005)  
Drilling 25.4mm(1") dia 150 rpm 0.28(0.011)  
Turning - Roughing 30 - 45 ( 100 - 150 ) 0.4-0.5 (0.015-0.020) 2.5 (0.1)
Turning - Finishing 50 - 60 ( 165 - 200 ) 0.13-0.20 (0.005-0.008) 0.5 (0.02)
Tooling

Milling/Turning: Carbide (SANDVIK GC 235, SECO T25M)

Drilling: HSS, point angle 118°, chisel angle 120°

Alloy Comparisons

Alloy Comparisons S20910 S32205 N05500 S31254 FERRALIUM 255-SD50
(0.2% Proof Strength, N/mm2) 420 510 690 325 610

Corrosion Rate (mm.y-1)Seawater

 <0.01 <0.01 <0.18 <0.01 <0.01

Corrosion Rate (mm.y-1)10% sulphuric acid at 80°C

 0.7 0.4 0.1 <0.15 <0.15

Corrosion Rate (mm.y-1) Boiling 50% nitric acid

0.18 <0.15 0.15 <0.15 <0.15
Wear Properties related to Hardness (HRC) RC27 RC25 RC20 RC27 RC27

 

Main Export Market

  • Eastern Europe
  • North America
  • Mid East/Africa
  • Central/South America
  • Asia
  • Western Europe
  • Australasia
  • UAE

Sales Locations

U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
Products
Alloy Steel
Nickel Alloys
Copper Nickel
Duplex Stainless Steel
Stainless Steel
Inconel
Copper & Copper Alloy
Super Duplex
Carbon Steel
Brass
Mild Steel
Monel
Aluminium
 904L Grades
IBR Materials
Titanium
 LTCS Grades