ASTM B160 Nickel 201 Rods manufacturer & exporter


Products / Nickel Alloys / Inconel / Incoloy 825 Round Bar

Nickel-Alloy

What is Incoloy 825 | Incoloy 825 Principal Features | Incoloy 825 Strength | Incoloy 825 Physical Properties | Incoloy 825 Price

Nickel-Alloy
     

Nickel Alloys

PRODUCTS


Worldmap | Suppliers of Stainless Steel Industrial & Construction Products Worldwide
We are industrial suppliers of Nickel Alloy 200 Products
 

Please note: we may supply special diameters in small quantities at request

Incoloy 825 Round Bar Manufacturer & Industrial Suppliers

Nickel Bar, Rod & Wire
Sr. No.
Material
Diameter
Length
Specification
Manufacturer
1
Forged Bars
0.5 mm
to
500 mm
50 mm
To
6000 mm long
A-479
Mukund, Shah Alloys, Faker, Panchmahals, Chadan, Viraj, Bhansali & Imported

UNS NICKEL MATERIAL GRADES
Nickel grade UNS Werkstoff DIN
INCOLOY 825 UNS N08825 24,858 NiCr 21 Mo

Note:-
Grade 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420,430, 440A, 440B, 440C, 446, 202 Etc.
Other Special Grade Duplex Steel (2507, 2205, 329L), Stainless Steel 17-4 PH (630 Gr.) 15.5 PH, 17.7 PH, 4122 Etc.
Finishing Bright, Polish & Black
In Form of Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Block, Ingot, Forging Etc.
Hardness for Wire Soft, Hard, Half Hard Etc.
Value Added Service Machining (CNC), Centreless Grinding (CG), Heat Treatment, Annealed, Pickled, Polish, Rolling, Forging, Cutting, Bending, Minor Fabrication,
Test Certificate Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab / Under Third Party Inspection
Specialize 440C, CG, Forging, Wiremesh etc




Incoloy 825 Round Bar Application
Incoloy 825 Round Bar Uses
  • Architecture and construction
  • Aerospace
  • Nuclear Power
  • Fertilizers
  • Valve & Pumps
  • Petrochemical
  • Motor industry
  • Food and drink
  • Electronics
  • Transport and traffic
  • Pulp and paper industry
  • Medicine
  • Energy industry
  • Chemicals industry
  • Nickel Alloy in Pulp and Paper
Incoloy 825 Round Bar Order & Packing Information
  Min. Order: 10 Pieces (or please enquire for your customized order)
Trade Terms: FOB, CIF
Payment Terms: L/C, T/T
Packing: as per requirement
Place of Origin:JIANGSU, China
Means of Transport: Land, Ocean
Delivery Date: one or two week

Package:
in wooden crate with plastic caps on each end.

Nickel Alloy & Inconel Bar Grades Nickel Alloy & Inconel Bar Specifications Nickel Alloy & Inconel Bar Sizes
Nickel 200 Round Bar: ASTM B160 Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Monel 400 Round Bar AMS 4675, ASTM B164,
QQN-281 CL A
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Monel 405 Round Bar AMS 4674 QQN 281 CL B
ASME B164 CL B
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Monel 405 Hex Bar AMS 4674 QQN 281 CL B
ASME B164 CL B
Diameter: 0.5 mm to 510 mm
Length: 50 mm To 6000 mm long
Inconel 600 Round Bar
Inconel 600
Inconel Forged Bar
AMS 5665, ASTM B166, ASME SB166
MIL-N-6710 AMD .2, AMS 5687,
QQ-W-390C
Diameter: 0.5 mm to 499 mm
Length: 50 mm To 6000 mm long
Inconel 601 Round Bar
Inconel 601 Forged Bar
AMS 5715, ASTM B166, 
ASME SB166, DIN 17725, DIN 17754
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Inconel 625  Round Bar
Pyromet 625
Inconel 625 Forged Bar
AMS 5666, ASTM B446 Grd 1 Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Inconel 718  Flat Bar
Inconel 718 Round Bar
Pyromet 718 Round Bar
Inconel 718 Forged Bar
ASTM B637, ASME SB637, AMS 5662, AMS 5663, AMS 5962,
AMS 5664, RBO-170-153 Mod, 
VMS-110, B50TF15 CL D, SPS-M-275
B50T69A, C50TF13, DMS-2209
AIC-MS-110, EN 2404
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Inconel 718  Cold Reduced Round Bar
Inconel 718 Flat Bar
AIC-MS-110  DMS-2209  
AMS-5662,  HI SHEAR #156 
AMS-5962 (7-99 TO PRESENT) 
SPS-M-637, B50TF15 , VMS-110  
C50TF13 
Diameter: 0.5 mm to 470 mm
Length: 50 mm To 7000 mm long
Inconel X750 Round Bar
Inconel X750 Forgings
AMS 5667, B50YP44B1, AMS 5668
AMS 5670, AMS 5671, ASTM B637
ASME SB637, EN 10269
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Inconel 800 /800HT Round Bar ASTM B408, ASME SB408
AMS 5766
BS 3076NA15, ASME SA408
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Inconel/  Incoloy 825 Round Bar ASTM B425, ASME SB425 Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Hastelloy  C276 Round Bar AMS 5750, 
ASTM B574, ASME SB574
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
Hastelloy  X Round Bar
Alloy X Round Bar
AMS 5754  Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long
AERMET 100 Round Bar AMS-6532  
MIL-STD-2154 TYPE 1 CL A  
MIL-STD-2154 CL. A 
MMS-217 
Diameter: 0.5 mm to 500 mm
Length: 50 mm To 6000 mm long

 

Incoloy 825 Round Bar Ready stock

Incoloy Hex Bar

We can supply hex bar in all grades & size.

Grade: Inconel 625 & all Inconel Grades, SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420,430, 440A, 440B, 440C, 446, 202 Etc.

 




More useful information

A rebar (short for reinforcing bar), also known as reinforcing steel, reinforcement steel, rerod, a deformed bar, reo, or reo bar, is a common steel bar, and is commonly used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression. It is usually in the form of carbon steel bars or wires, and the surfaces may be deformed for a better bond with the concrete.

Sizes and grades

U.S. sizes

Imperial bar designations represent the bar diameter in fractions of ⅛ inch, such that #8 = 8⁄8 inch = 1 inch diameter. Area = (bar size/9)^2 such that area of #8 = (8/9)^2 = 0.79 inch squared. This applies to #8 bars and smaller. Larger bars are sized to correspond to square bars that were formerly used.

Imperial

Bar Size

"Soft"

Metric Size

Weight per unit length

(lb⁄ft)

Mass per unit length

(kg/m)

Nominal Diameter

(in)

Nominal Diameter

(mm)

Nominal Area

(in²)

Nominal Area

(mm²)

#3 #10 0.376 0.561 0.375 = ⅜ 9.525 0.11 71
#4 #13 0.668 0.996 0.500 = ½ 12.7 0.20 129
#5 #16 1.043 1.556 0.625 = ⅝ 15.875 0.31 200
#6 #19 1.502 2.24 0.750 = ¾ 19.05 0.44 284
#7 #22 2.044 3.049 0.875 = ⅞ 22.225 0.60 387
#8 #25 2.670 3.982 1.000 25.4 0.79 509
#9 #29 3.400 5.071 1.128 28.65 1.00 645
#10 #32 4.303 6.418 1.270 32.26 1.27 819
#11 #36 5.313 7.924 1.410 35.81 1.56 1006
#14 #43 7.650 11.41 1.693 43 2.25 1452
#18 #57 13.60 20.284 2.257 57.3 4.00 2581
#18J 14.60 21.775 2.337 59.4 4.29 2678

Canadian sizes

Metric bar designations represent the nominal bar diameter in millimeters, rounded to the nearest 5 mm.

Metric

Bar Size

Mass per unit length

(kg/m)

Nominal Diameter

(mm)

Cross-Sectional

Area (mm²)

10M 0.785 11.3 100
15M 1.570 16.0 200
20M 2.355 19.5 300
25M 3.925 25.2 500
30M 5.495 29.9 700
35M 7.850 35.7 1000
45M 11.775 43.7 1500
55M 19.625 56.4 2500

European sizes

Metric bar designations represent the nominal bar diameter in millimetres. Bars in Europe will be specified to comply with the standard EN 10080 (awaiting introduction as of early 2007), although various national standards still remain in force (e.g. BS 4449 in the United Kingdom).

Metric

Bar Size

Mass per unit length

(kg/m)

Nominal Diameter

(mm)

Cross-Sectional

Area (mm²)

6,0 0.222 6 28.3
8,0 0.395 8 50.3
10,0 0.617 10 78.5
12,0 0.888 12 113
14,0 1.21 14 154
16,0 1.579 16 201
20,0 2.467 20 314
25,0 3.855 25 491
28,0 4.83 28 616
32,0 6.316 32 804
40,0 9.868 40 1257
50,0 15.413 50 1963

Australian Sizes

Reinforcement for use in concrete construction is subject to the requirements of Australian Standards AS3600-2009 (Concrete Structures) and AS/NZS4671-2001 (Steel Reinforcing for Concrete). There are other standards that also apply to testing, welding and galvanising. The designation of reinforcement is defined in AS/NZS4671-2001 using the following formats:

Bars

Shape Code Yield Strength (MPa) Ductility Class Nominal Diameter (mm)
D - Deformed Bar 500 MPa N - Normal 10
R - Round Bar 250 MPa L - Low 12
16
20
24
28
32
36
40

EN 10080: The EN 10080: Steel for the reinforcement of concrete is an European Standard. This standard is referenced by EN 1992.

Size Range

Alloy 600 wire, bar, rod, forging, plate, sheet, tube, fastener and other standard forms are available.

Alloy 600 is a nickel-chromium alloy with excellent resistance to organic acids and is used extensively in fatty acid processing. The high nickel content of Alloy 600 provides good resistance to corrosion under reducing conditions, and its chromium content, resistance under oxidizing conditions. The alloy is virtually immune to chloride stress-corrosion cracking. It is also employed widely in the production and handling of caustic soda and alkali chemicals. Alloy 600 is also an excellent material for high-temperature applications requiring a combination of heat and corrosion resistance. The excellent performance of the alloy in hot halogen environments makes it a popular choice for organic chlorination processes. Alloy 600 also resists oxidation, carburization, and nitridation.

Corrosion resistance
Inconel 600 alloy are resistant to corrosion for a variety of corrosive media. Chromium alloy has better corrosion resistance than the Nickel 99.2 (alloy 200) and Ni 99.2 (alloy 201, a low-carbon) in the oxidation conditions. Meanwhile, the higher nickel content of the alloy make it has good corrosion resistance in reduction conditions and alkaline solution. And can effectively prevent the chlorine - iron stress corrosion cracking. Inconel 600 alloy have good corrosion resistance in acetic acid, acetic acid, YiSuan, stearic acid, organic acids, have medium corrosion resistance in inorganic acid. It has very good corrosion resistance in a nuclear reactor primary and secondary recycling of high purity water. The especially outstanding performance of Inconel 600 is resistant to dry chlorine and hydrogen chloride corrosion, the application temperature can be 650oC. At high temperatures, annealed and solution-treated state of the alloy has a very good antioxidant properties and high peel strength in air. Under high temperature, annealing state and solid solution processing mode of alloy has the very good antioxidant spalling performance and high strength in the air. The alloy resist ammonia nitrogen and permeability, carburizing atmosphere, but in REDOX conditions variations, alloy will be affected by the partial oxidation corrosion of medium (such as green death liquid)

Specifications

Form Standard
Metal Type UNS N06600
Bar ASTM B166 AMS 5665 Din 17752
Wire
Sheet ASTM B168 AMS 5540 Din 17750
Plate ASTM B168 AMS 5540 Din 17750
Tube ASTM B167
Pipe ASTM B167
Fitting ASTM B366
Forging ASTM B564 Din 17754
Weld Wire FM 82/ ERNiCr-3
Weld Electrode FM 182/ ENiCrFe-3
Din 2.4816

Specifications

Nickel - Monel® - Inconel® - Incoloy® - Hastelloy® - Alloy 20 - Duplex - Olets® are the registered trademarks of their respective owners.

     
Products
904L Grades
LTCS Grades