Home / Products / Nickel Alloys / Inconel 601 / ASTM B167 Inconel 601 Seamless Tube
Inconel 601 (UNS: N06601, Werkstoff Nr.: 2.4851)
Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Inconel® 601 sheet is available in thicknesses ranging from .010 to .120". Inconel® 601 strip in coil from is available in lighter gauges up 24" wide. Inconel® 601 plate is available up 2" thickness. Inconel® 601 bar is available in wrought bar up to 3" diameter and larger sizes and shapes may be forged to order. Inconel® 601 seamless pipe is available up to 4" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 601 tubing is not commonly available, but can be produced to order. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times. Available forms are seamless pipe, welded pipe, seamless tube, welded tube and bar.
ASTM B167 Inconel 601 Seamless Tube
Specifications
| Standards |
Designation |
| ASTM |
B 167 |
| ASME |
SB 167 |
| UNS |
N06601 |
| Werkstoff Nr. |
2.4851 |
| NB Sizes |
Sch 5 |
Sch 10 |
Sch 40 |
Sch 80 |
Sch 160 |
| 1/8″ |
 |
|
|
|
|
| 1/4″ |
|
|
|
|
|
| 3/8″ |
|
|
|
|
|
| 1/2″ |
|
|
|
|
|
| 3/4″ |
|
|
|
|
|
| 1″ |
|
|
|
|
|
| 1 1/4″ |
|
|
|
|
|
| 1 1/2″ |
|
|
|
|
|
| 2″ |
|
|
|
|
|
| 2 1/2″ |
|
|
|
|
|
| 3″ |
|
|
|
|
|
| 4″ |
|
|
|
|
|
| 5″ |
|
|
|
|
|
| 6″ |
|
|
|
|
|
Dimensions
Inconel 601 is a nickel-chromium-iron alloy. Inconel 601 is a general purpose engineering material that require resistance to heat & corrosion. Inconel 601 has outstanding resistance to high temperature oxidation.
Chemical Composition
|
Inconel 601 |
| Ni |
58.0 – 63.0 |
| Cr |
21.0 – 25.0 |
| Fe |
Balance |
| Al |
1.0 – 1.7 |
| C |
0.10 max |
| Mn |
1.0 max |
| S |
0.015 max |
| Si |
0.5 max |
| Cu |
1.0 max |
Mechanical & Physical Properties – Inconel 601
| Density |
8.1 g/cm3 |
| Melting Point |
1411 °C (2571 °F) |
| Tensile Strength |
Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) |
Psi – 30,000 , MPa – 205 |
| Elongation |
30 % |
Subcategory: Metal; Nickel Base; Superalloy
Key Words: Inconel 601, Nickel-Chromium Alloy; Werkstoff Nr. 2.4851, UNS N06601; ASME Boiler Code Section VIII; AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168; DIN 17742, 17750 - 17752
Component Wt. %
Al 1 - 1.7
C Max 0.1
Cr 21 - 25 |
Component Wt. %
Cu Max 1
Fe 13
Mn Max 1
58 - 63 |
Component Wt. %
Ni
S Max 0.015
Si Max 0.5 |
| Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip, and wire. |
| Electrical Properties |
| Electrical Resistivity |
0.000119 ohm-cm |
0.000119 ohm-cm |
|
| Magnetic Permeability |
1.003 |
1.003 |
at 200 oersted (15.9 kA/m) |
| Curie Temperature |
Max -196 °C |
Max -321 °F |
|
| Thermal Properties |
| CTE, linear 20°C |
13.75 µm/m-°C |
7.64 µin/in-°F |
20-100°C |
| Heat Capacity |
0.448 J/g-°C |
0.107 BTU/lb-°F |
|
| Thermal Conductivity |
11.2 W/m-K |
77.7 BTU-in/hr-ft²-°F |
|
| Melting Point |
1360 - 1411 °C |
2480 - 2570 °F |
|
| Solidus |
1360 °C |
2480 °F |
|
| Liquidus |
1411 °C |
2570 °F |
|
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
Sales Locations
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
