Home / Products / Nickel Alloys / Inconel 601 / ASTM B168 Inconel 601 Sheets
Inconel 601 (UNS: N06601, Werkstoff Nr.: 2.4851)
We are one of the leading stockiest and exporters of Inconel , which are imported by us directly from European and American Mills. These High corrosion Nickel Alloy Material are used in Oil & Gas, Heat Exchanges, Aerospace, Pharmaceutical, Defense. We are amongst the trusted exporters of quality Inconel Plates that are sourced from dependable vendors.
ASTM B168 Inconel 601 Sheets
Specifications
| Standards |
Designation |
| ASTM |
B 168 |
| ASME |
SB 168 |
| UNS |
N06601 |
| Werkstoff Nr. |
2.4851 |
| Sizes |
Availability |
| 0.4mm |
|
| 0.5mm |
|
| 0.8mm |
|
| 1mm |
|
| 1.2mm |
|
| 1.6mm |
|
| 2mm |
|
| 3mm |
|
| 4mm |
|
| 5mm |
|
| 6mm |
|
| 8mm |
|
| 10mm |
|
| 12mm |
|
| 16mm |
|
| 20mm |
|
| 25mm |
|
Above table represents that we keep in stock of Inconel 601 in form of Sheets / Sheet & Plates / Plate / Coil / Coils. Other sizes can be made available on request.
Dimensions
Inconel 601 is a nickel-chromium-iron alloy. Inconel 601 is a general purpose engineering material that require resistance to heat & corrosion. Inconel 601 has outstanding resistance to high temperature oxidation.
Chemical Composition
|
Inconel 601 |
| Ni |
58.0 – 63.0 |
| Cr |
21.0 – 25.0 |
| Fe |
Balance |
| Al |
1.0 – 1.7 |
| C |
0.10 max |
| Mn |
1.0 max |
| S |
0.015 max |
| Si |
0.5 max |
| Cu |
1.0 max |
Mechanical & Physical Properties – Inconel 601
| Density |
8.1 g/cm3 |
| Melting Point |
1411 °C (2571 °F) |
| Tensile Strength |
Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) |
Psi – 30,000 , MPa – 205 |
| Elongation |
30 % |
Subcategory: Metal; Nickel Base; Superalloy
Key Words: Inconel 601, Nickel-Chromium Alloy; Werkstoff Nr. 2.4851, UNS N06601; ASME Boiler Code Section VIII; AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168; DIN 17742, 17750 - 17752
Component Wt. %
Al 1 - 1.7
C Max 0.1
Cr 21 - 25 |
Component Wt. %
Cu Max 1
Fe 13
Mn Max 1
58 - 63 |
Component Wt. %
Ni
S Max 0.015
Si Max 0.5 |
| Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip, and wire. |
| Electrical Properties |
| Electrical Resistivity |
0.000119 ohm-cm |
0.000119 ohm-cm |
|
| Magnetic Permeability |
1.003 |
1.003 |
at 200 oersted (15.9 kA/m) |
| Curie Temperature |
Max -196 °C |
Max -321 °F |
|
| Thermal Properties |
| CTE, linear 20°C |
13.75 µm/m-°C |
7.64 µin/in-°F |
20-100°C |
| Heat Capacity |
0.448 J/g-°C |
0.107 BTU/lb-°F |
|
| Thermal Conductivity |
11.2 W/m-K |
77.7 BTU-in/hr-ft²-°F |
|
| Melting Point |
1360 - 1411 °C |
2480 - 2570 °F |
|
| Solidus |
1360 °C |
2480 °F |
|
| Liquidus |
1411 °C |
2570 °F |
|
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
Sales Locations
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
