Home / Products / Nickel Alloys / Inconel 625 / ASTM B366 Inconel 625 Flexolet Socket Weld
Inconel 625 (UNS: N06625, Werkstoff Nr.: 2.4856)
We are engaged in the manufacture and supply of a wide array of Socket Welds. Our range of Socket Welds is attached in the pipe in the recessed area of the valve or flange. Our range of Socket Welds is applicable for small pipe diameters and normally for small diameter piping. Leakage proof and corrosion resistant, this range helps in joining the pipes and valves. Moreover, our range is reckoned amongst the clients for its hassle free performance.
ASTM B366 Inconel 625 Flexolet Socket Weld
Specifications
| Standards |
Designation |
| ASTM |
B 366 |
| ASME |
SB 366 |
| UNS |
N06625 |
| Werkstoff Nr. |
2.4856 |
Dimensions
Chemical Composition
|
Inconel 625 |
| Ni |
58.0 min |
| Cr |
20.0 – 23.0 |
| Fe |
5.0 max |
| C |
0.10 max |
| Mn |
0.50 max |
| Si |
0.50 max |
| Mo |
8.0 – 10.0 |
| Co |
1.0 max |
| Al |
0.40 max |
| Ti |
0.40 max |
| Nb + Ta |
3.15 – 4.15 |
| P |
0.015 max |
| S |
0.015 max |
Mechanical & Physical Properties – Inconel 625
| Density |
8.4 g/cm3 |
| Melting Point |
1350 °C (2460 °F) |
| Tensile Strength |
Psi – 135,000 , MPa – 930 |
| Yield Strength (0.2%Offset) |
Psi – 75,000 , MPa – 517 |
| Elongation |
42.5 % |
Subcategory: Metal; Nickel Base; Superalloy
Key Words: ASME SB-443, SB-444, SB-446, SB-564, Boiler Code Sections I, III, VIII, IX; AFNOR NC 22 D Nb; VdTUV 499, AMS 5581, AMS 5599, AMS 5666, AMS 5837; DIN 17744, 17750-17752, 17754; Werkstoff Nr. 2.4856; NACE MR-01-75, UNS N06625; BS 3072, 3074, 3076 (NA21); ASTM B443, ASTM B444, ASTM B446, ASTM B564, ASTM B704, ASTM B705, ASTM B751
Component
Al
C
Co
Cr
Fe |
Wt. %
Max 0.4
Max 0.1
Max 1
20 - 23
Max 5 |
Component
Mn
Mo
Nb
Ni |
Wt. %
Max 0.5
8 - 10
3.15 - 4.15
Min 58 |
| Electrical Properties |
| Electrical Resistivity |
0.000129 ohm-cm |
0.000129 ohm-cm |
|
| Magnetic Permeability |
1.0006 |
1.0006 |
at 200 oersted (15.9 kA/m) |
| Curie Temperature |
Max -196 °C |
Max -321 °F |
|
| Thermal Properties |
| CTE, linear 20°C |
12.8 µm/m-°C |
7.11 µin/in-°F |
20-100°C |
| Heat Capacity |
0.41 J/g-°C |
0.098 BTU/lb-°F |
|
| Thermal Conductivity |
9.8 W/m-K |
68 BTU-in/hr-ft²-°F |
|
| Melting Point |
1290 - 1350 °C |
2350 - 2460 °F |
|
| Solidus |
1290 °C |
2350 °F |
|
| Liquidus |
1350 °C |
2460 °F |
|
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
Sales Locations
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
